A Hutch Is Not Enough – so how about a shed?
Let’s just start with a reminder of our minimum size guidelines:
10ft x 6ft overall space with a run height of 3ft
Or if you prefer metric
3m x 2 m with a height of 1m
This is for 2 average sized rabbits, so if you have giant breeds you will need to increase that.
Unless you get a 10×6 ft shed to convert then you will still need to attach an exercise run to it.
Benefits of a garden shed:
- More protection from the weather. For both rabbits and owners who are cleaning out and feeding
- More space for the rabbits than a hutch, so they can rear up fully, stretch out fully, and jump etc.
Firstly decide how much room you have for the shed and the run. Remember that the run does not need to be right next to the shed if you are going to use a Runaround system to connect them.
Once you have ordered your shed and built it we recommend you line it. This will offer insulation but also stop the rabbit chewing through the shed, or a determined predator chewing in.
In this work-in-progress example we have lined the shed with plywood, and made a shelf which is accessed by the rabbits via some decking steps made to size. This gives the rabbits more floor space inside and offers them a more enriched environment.
If you use thicker plywood to line the shed it offers more protection, and you can put insulation between the shed and the plywood.
It is a good idea to line the shed (and shelf) with lino to protect it from urine and what ever else the rabbits get up to. You can add vet bed, large litter trays on top of that. Don’t forget to add the pop holes, Runaround connectors or cat flaps so that your rabbits can access their safe exercise area.
Once you have finished it might look something like this. Note that this shed has two Runaround holes. This is so that the rabbits, who have prey animal instincts feel safe and always have the option of two escape routes from the shed or run area.
Don’t forget the ventilation!
It is a good idea to make a secondary mesh door behind the shed door which you can open during the day, especially in nice weather, to make sure that the rabbits do not get too hot. Drilling holes or removing a horizontal beam of wood from the walls just under the eves of the roof will provide an air outlet. An air inlet is also required and should be created at about half the shed’s height, this prevents the rabbits sitting in a draught. This could be made by replacing the window with mesh or in a similar fashion to the air inlet.
This way natural ventilation is created drawing air into the shed, removing ammonia (from rabbit urine) and heat travelling up and out through the air outlet. This is the best way to reduce respiratory disease (snuffles, pneumonia) where the main contributor is from exposure to high ammonia levels burning the respiratory system, allowing bacteria to then invade the respiratory tissues. You will know you have got good ventilation when you don’t see cobwebs building up. Remember to cover all air vents with wire mesh to prevent predator entry.
An example provided by Wood Green The Animals Charity.
Note on this example how there is a kickboard at the bottom so that you can open the door and walk in without the rabbits rushing out! This is a great idea and something to incorporate if you can. It will also offer more safety as it will prevent anything that has chewed the bottom of the shed door getting in, or the rabbits chewing out.
Like the example shows, you are going to need a safe enclosed exercise area which is accessible to them 24/7.
If you are going to build your own exercise area, remember that they need a roof and a floor too.
Escape and intruder proofing
Regardless of whether you buy or build an exercise area, if it is sited on grass then sink the wire under the earth so that the rabbits can not escape and a predator can not dig in to get them.
You might prefer to site it on paving stones or decking, if you do this then it is a nice idea to give them a grazing tray. In fact have two, so that one can be in with the rabbits and one can be growing again.
The enclosure must be secure. If it’s outside then it has to keep out foxes, rats and other predators so the mesh and bolts must be of a good quality.
Go for welded mesh of a heavy gauge, not chicken wire, which they can bite through. Use a bolt you can padlock.
Give a lot of thought to the wire. There is a gauging system for thickness of wire and the lower the number, the thicker the wire. 16g (1.2mm) is the minimum we recommend. And 12g is even better. Ensure that the wire is properly fixed to the wood, attached on the inside.
The size of the holes in the wire is important. 13mm is perfect. This will keep out stoats, polecats and weasels, which are all a danger to rabbits but are smaller than foxes.
The staples that hold the wire to the wood must be as strong as possible so go for the sturdiest you can find.
This set up has everything in it that the rabbits would need. The shed is converted. There are 2 bolts on the door, top and bottom for extra security. We have used 12g 13mm wire attached by strong galvanised wire staples. There is a felt roof for protection and there is wire sunk under the grass area. There are 2 holes for entrance / exit between the shed and the exercise area.
If you look inside the run you will see we have given the rabbits:
- Platforms to sit on and look for danger. This also allows them to stretch and jump
- Grass to graze and a hay rack at all times
- Hiding places
- A place to dig
- Space to sit apart from each other if they want to
- Plenty of space to run, jump and binky.